.:: Blackc0de Forum ::.
Would you like to react to this message? Create an account in a few clicks or log in to continue.

-=Explore The World From Our Binary=-
 
HomeIndeksLatest imagesPendaftaranLogin

 

 Repair Windows XP without Re-installing

Go down 
2 posters
PengirimMessage
Kevin Toor
NuuBiiTooL
NuuBiiTooL
Kevin Toor


Jumlah posting : 13
Points : 40
Reputation : 1
Join date : 22.10.11

Repair Windows XP without Re-installing Empty
PostSubyek: Repair Windows XP without Re-installing   Repair Windows XP without Re-installing Icon_minitimeSat Oct 22, 2011 7:33 pm

1. Fixing Installation (Repair Install)
If Windows XP is damaged (corrupted) where you do not have another operatingsystem to boot,
You can do a repair installation (Repair Install) who works as the setting (setting)
the beginning.
- Make sure you have the key (key) Windows XP valid.

- The entire process will take approximately 1 / 2 or 1 hour, depending on the spec of your computer.
- If you are prompted for an administrator password, you should select the repair option (repair) the second,
not the first.
- Insert your Windows XP CD and boot from the CD.
- When it appeared the second repair option R = Repair, press R button
This will start the repair.
- Press the F8 key to agree to proceed “I Agree at the Licensing Agreement”
- Press the R button when the directory where you installed Windows XP.Usually C: \ WINDOWS
It will then check the C: drive and start copying files.
And automatically restart if necessary. Leave the CD in the drive.
- Next you will see a picture of “progress bar” that is part of the improvement,
he looks like a normal XP installation, including “Collecting Information, Dynamic Update,
Preparing Installation, Installing Windows, finalizing the Installation “.
- When asked, click the Next button
- When asked to enter a key, enter key (key) your valid Windows XP.
- Normally you want to remain in the same Domain or Workgroup.
- The computer will restart.
- Then you will have the same screen as the activation of the system when the normal installation.
- Register if you want (usually not necessary).
- Done
Now you can log in with your existing account.
2. NTOSKRNL Damaged or Missing (Missing or Corrupt)
If you find an error message that “NTOSKRNL not found” / NTOSKRNL not found, do:
- Insert the Windows XP CD and booting from the CD.
- At R = Repair option appears first, press the R key
- Press the number corresponding to the location of the Windows installation you want to repair.
- Usually # 1
- Change to the CD ROM drive is located.
- Type: CD i386
- Type: expand ntkrnlmp.ex_ C: \ Windows \ System32 \ ntoskrnl.exe
- If Windows XP is installed elsewhere, change according to location.
- Remove your CD and type EXIT

3. HAL.DLL Damaged or Missing (Missing or Corrupt)
If you get an error regarding a missing or corrupt hal.dll file, it is possible
BOOT.INI file has the wrong configuration (misconfigured).
- Insert the Windows XP CD and booting from the CD.
- At R = Repair option appears first, press the R key
- Press the number corresponding to the location of the Windows installation you want to repair.
- Usually # 1
- Type: bootcfg / list
Displays the contents of / feedback on the current BOOT.INI file
- Type: bootcfg / rebuild
Improve the configuration of the BOOT.INI file
- Remove your CD and type EXIT
4. Directory \ WINDOWS \ SYSTEM32 \ CONFIG damaged or missing
If you get an error with the inscription:
“Windows Could not Start Because the following files is missing or corrupt
\ WINDOWS \ SYSTEM32 \ CONFIG \ SYSTEM or \ WINDOWS \ SYSTEM32 \ CONFIG \ SOFTWARE ”
- Insert the Windows XP CD and booting from the CD.
- At R = Repair option appears first, press the R key
- Press the number corresponding to the location of the Windows installation you want to repair.
- Usually # 1
- Enter the administrator password if necessary.
- Type: cd \ windows \ system32 \ config
- Next depending on the location of the damage:
- Type: ren ren system software software.rusak OR system.rusak
- Next again also depends on the location of the damage:
- Type: copy \ windows \ repair \ system
- Type: copy \ windows \ repair \ software
- Remove your CD and type EXIT
5. NTLDR or NTDETECT.COM not found (or NTDETECT.COM NTLDR Not Found)
If you find an error that NTLDR is not found when booting:
a. For the type of FAT
- Please you boot from your Win98 floppy and copy the files NTLDR or NTDETECT.COM
from the i386 directory to the drive stem (root) C: \
b. For the type of NTFS partition
- Insert the Windows XP CD and booting from the CD.
- At R = Repair option appears first, press the R key
- Press the number corresponding to the location of the Windows installation you want to repair.
- Usually # 1
- Enter the administrator password if necessary.
- Enter the following command, where X: is the address of the CD ROM drive (Customize!).
- Type: COPY X: \ i386 \ NTLDR C: \
- Type: COPY X: \ i386 \ NTDETECT.COM C: \
- Remove your CD and type EXIT

live're always black code Repair Windows XP without Re-installing 772168924
Kembali Ke Atas Go down
Kr4L BeNiM
Top Nubie
Top Nubie



Jumlah posting : 28
Points : 39
Reputation : 0
Join date : 13.11.11

Repair Windows XP without Re-installing Empty
PostSubyek: Re: Repair Windows XP without Re-installing   Repair Windows XP without Re-installing Icon_minitimeSun Nov 13, 2011 11:53 pm

what if without re installing
Kembali Ke Atas Go down
 
Repair Windows XP without Re-installing
Kembali Ke Atas 
Halaman 1 dari 1
 Similar topics
-
» Repair Windows dengan Recovery Console
» All Blackberry Repair Software
» Restore Grub 2 After Installing Other OS
» Installing Linux Billing
» Virtual box - Installing a linux guest

Permissions in this forum:Anda tidak dapat menjawab topik
.:: Blackc0de Forum ::. :: BoarD Blackc0de :: International Room :: Operating system (Int.) :: Windows-
Navigasi: